1. Surface quality. When purchasing a desk, look at the surface of the furniture material for scratches, indentations, bubbling, degumming and peeling marks. Pay attention to whether the wood grain pattern is natural and smooth.
2. Production quality. Whether the edge of the wooden furniture is flat and the angle is very accurate; whether the decorative parts of the side and the surface are evenly coated, whether the bonding is firm, whether the trimming is smooth and smooth; the side plates, door panels, drawer panels, etc. Whether the end face of the visible part is sealed or not; the assembled part depends on whether the hole at the hole is exquisite and tidy, and whether the connecting piece is firm after installation; whether the gap between the door and the drawer is too large, the general requirement is 1.5 Between mm and 2.0 mm, the opening and closing of the door and drawer are flexible and free.
3. The quality of metal parts and plastic parts. The quality of the metal parts also determines the inherent quality of the furniture inside the wooden furniture. Metal parts require dexterity, smoothness, and good surface plating treatment. There should be no rust, burrs, etc., and the precision of the fittings should be high. Plastic parts should be beautiful in appearance and bright in color. The parts of the force in use should have strength and elasticity, and should not be too thin. Open connectors require flexible rotation and no friction.