I bought 4 more sofa feet in furniture legs metal alloy casting for 4 additional shelves and they are all the same construction/quality with one minor exception - the screw coming out of the leg can be slightly off-center on some legs, which you mainly only notice when you screw it into the mounting plate. It is not far off enough to make a difference on my setup especially since I put the legs inward from the front face by 1", but thought it was worth mentioning in case your setup requires exactness. Again, no other variances in quality from the first two sets I bought and happy the quality are consistent!
Also if you are concerned with the mounting plates' screws sitting firm in cheap particle board furniture, I recommend a 1/16" drill bit for the pilot hole instead of 3/32". I didn't use 1/16" on mine, but I had to be careful to stop my screwdriver when the screw was all the way in because it would continue to spin and strip out the hole if I wasn't cautious. That said, each plate and leg sits firmly in my particle board shelves.
|Height||100mm, 120mm, 150mm or customized|
|Thickness||1.0mm, 1.2mm, 1.5mm|
|Sample||Sample is available, and be finished within 2 weeks.|
|Payment||T/T 30% deposit, Credit card, Paypal, L/C, Western Union|
|Shipment port||Tianjin & Qingdao|
|Discount||Great event discounts in March and September|